en'>

How To Build A Puzzle Table

How To Build A Puzzle Table – I’ve been into puzzles and recently I was making a DIY puzzle board out of wood when I saw this meme pop up on my Facebook feed and it caught my attention:

“The hot girl is tired. I want to be old*

How To Build A Puzzle Table

How To Build A Puzzle Table

When I first read it and laughed, I thought that the memories were embarrassing. It also creates familiar pictures that the elderly and the elderly like to knit, fall into a good puzzle (or sit down to take a bath!).

Diy Modern Industrial Picnic Table Plans 6ft Steel And Wood

The ages returned to the love and joy of the puzzle (and in my thirties, when I had a row set to do in my old house, I learned to sit and bathe)!

How To Build A Puzzle Table

(By the way, did you know that many companies are unable to keep puzzles in stock due to increased demand?!).

One of the most satisfying experiences is finding a puzzle piece that fits perfectly. Aha…! It’s fun for everyone to enjoy. I am telling everyone, uncles and aunties, to jump into this satisfying, stress-free place.

How To Build A Puzzle Table

Jumbl 4 Drawer Wooden Puzzle Board Only $47.99 Shipped On Amazon (regularly $80)

But along the way, I see that there are some real problems with a bad hobby:

All these problems I experienced or heard myself from my friends and family, trying to revive my love of puzzles. This led me to research how to make a DIY puzzle board.

How To Build A Puzzle Table

Puzzle boards are hard, stable surfaces with raised edges, so you can do a puzzle anywhere and everywhere without sliding your puzzle pieces. When you’re done working on a puzzle, you can easily store the puzzle board under the couch or bed (or anywhere). Some puzzle boards have drawers to store loose pieces or a protective cover on top.

Pcs Jigsaw Puzzles Board Wooden Storage Table Tray With Foldable Legs Jumbo

On Amazon, puzzle boards with drawers range from $80 – $139 (I’ve seen them for over $200 in puzzle stores!). If you’re on a tight budget, spending that much on a puzzle board isn’t cheap.

How To Build A Puzzle Table

It is possible to DIY your own puzzle board with drawings with a few tools you already have in your DIY toolbox! If you don’t know how to use the tools or don’t have your own, send this tutorial to a friend or your friend and leave a note that you want to give them a gift. 🙂 Trust me, it’s easy!

Before we get into the 10 steps of this tutorial, let me point out one of the biggest problems you’ll face when making a DIY puzzle table with drawers: you might get the wrong size.

How To Build A Puzzle Table

Diy Puzzle Table With Easy Step By Step Build Plans

It would be nice to think that all 1000 piece puzzles are the same, but it depends on two things:

Check the types of puzzles you want to make before making a DIY puzzle board to make sure it fits. The first puzzle board I made was 20″ x 24″ and was perfect for this 1000 piece puzzle.

How To Build A Puzzle Table

However, for Ravensburger puzzles (one of the most popular puzzles) or White Mountain puzzles, it was small.

How To Build A Jigsaw Puzzle Easel?

Although it depends on your favorite puzzle brand, here are some good common puzzle board sizes:

How To Build A Puzzle Table

The top and bottom of your DIY puzzle board will be the same height and width. The big question is, what size puzzle board do you need for a 500, 1000 or 2000 piece puzzle?

As I said before, it depends on the type of puzzle you want.

How To Build A Puzzle Table

Office Team Assembling Jigsaw Puzzle Pieces On Table Top View On Hands Stock Photo

Whatever puzzle board you decide to make, make sure the top and bottom MDF pieces are the same size.

The center brackets are 1″ long. The easiest way to cut these pieces is with my track saw, but not everyone has a track saw. However, these pieces can be cut with a small saw. If you are using a puzzle, it is easiest to buy a wide piece of pine board and cut 1″ long strips across the width of your puzzle board.

How To Build A Puzzle Table

Inside the puzzle board, there are central supports that are not only attached to the top and bottom of the puzzle board. But these drawers also make small spaces to slide the puzzle board in and out.

Buy Bits And Pieces

Using a piece of wood glue, line the edges of the center support up, down, and in the middle. The spacing depends on how wide you want your drawings to be.

How To Build A Puzzle Table

For this puzzle table, I added three brackets, which allowed me to make 4 drawers (two on each side).

The size of your puzzle board will determine how wide your drawing will be. Mine is 9″ x 13″. And since my puzzle board was a large 28″ x 34″, there were two large drawers that were 9″ x 13″ and the smaller drawers were just over 6″ x 13″.

How To Build A Puzzle Table

Building Wooden Block Puzzle On The Marble Table / Copy Space And Closeup Hand Try To Build The Blocks Wood Game Stock Image

For this project, you don’t have to cut your pieces small to use the drawers. You can use ready-made trim that can be purchased at Home Depot in the LUMBER section. It is easier to buy ready-made than to cut it yourself with a jigsaw. You will get clean results.

Fortunately, I used my track saw to cut them (you can also use a table saw, but honestly, table saws are afraid of bright lights, LOL). The miter saw is easy to use and makes precise, safe and clean cuts.

How To Build A Puzzle Table

I cut all the side pieces needed to make the drawers 5/8″ thick and 3/8″ wide.

Jumbl 1500 Piece Puzzle Board Rack W/mat, 27” X 35” Wooden Jigsaw Puzzle Table

You don’t have to cut the edges of the drawer sides at 45 degrees. Instead, you can use butt joints (which connect the flat ends together). Although it is not perfect, it gives you an idea of ​​what you can try to arrange your butt joints. With butt joints, the side pieces may need to be altered slightly to get a perfect fit.

How To Build A Puzzle Table

If you are doing moderate fools, you can use a square with an angle of 45 degrees. Then use a measuring tape like this to make it easier to cut.

If all the edges are cut at 45 degrees, you can easily join the edges to make miter edges. Again, you don’t have to cut these corners; you can easily make a butt joint to make it easier. But I like the look of the mitered corners. 🙂

How To Build A Puzzle Table

Diy Puzzle Boards Ideas: How To Make A Puzzle Board

Then glue the wooden frame to the top of the puzzle drawer. Use a nail with short nails (or small nails and a hammer) to secure the wood block to the base. (Be sure not to drive bent nails through the wood so that your wood is thrown the other way.)

You will need a drill and power drill to make a hole in the front of each drawer to fit the drawer handle. I got these little quotes from a salon project, but you can order other little quotes on Amazon.

How To Build A Puzzle Table

Placing bricks behind the drawers prevents the drawers from falling into the puzzle board. It shouldn’t be too thick, just thick enough to stop the drawers.

Best Puzzle Boards (updated 2022)

Use wood glue to glue the block to the center of the drawers, making sure the block is level with the drawers.

How To Build A Puzzle Table

On a puzzle board I made as a gift for my mother, I used a piece of MDF to make the blocks. In my experience, I prefer a thicker lid so that the drawers don’t accidentally slide off the stand.

Once you’ve finished the inside of the puzzle board and know that the drawings fit, it’s time to attach the MDF to the top of the puzzle board.

How To Build A Puzzle Table

Easy And Quick Puzzle Coffee Table Plans • Its Overflowing

Apply wood glue to the wooden supports, then place the MDF on top of it, lining up the edges as much as possible. Use clamps to secure the top to the puzzle board and remove any excess wood glue from the sides.

After the wood glue has set, use a nail (or a hammer and small nails) to nail the top of the puzzle board. On the sides, nail only where you can see the wood support, do not drive nails into the drawers. (For example, see the red arrows below). If you drive nails into the drawers, the drawers will not open or close. Oh! 🙂

How To Build A Puzzle Table

For the top and bottom of the puzzle board, it is safe to use 4″ to 6″ nails along the entire length.

How To Build A Pallet Puzzle Table Diy

Puzzle boards need edges to keep your puzzles from sliding. That’s where the border crossing comes from! Again, you can cut your own or use ready-made cutouts and glue them on.

How To Build A Puzzle Table

So you can carry …) but the handle is useful

Puzzle coffee table build plans, how to build puzzle box, best way to build a puzzle, how to build table, how to build a puzzle table, how to build a jigsaw puzzle table, build a jigsaw puzzle table, how to build a crossword puzzle for free, how to build a puzzle, build a puzzle table, how to build a crossword puzzle, build your own puzzle table

Leave a Comment