How To Make A Live Edge Epoxy Table

How To Make A Live Edge Epoxy Table – Home » DIY » DIY » How not to make a coffee table directly on the river

Building an epoxy resin coffee table is pretty easy, isn’t it? Take some wood with sharp edges, cut it in half, make a mold, pour the resin, unmold it… easy. Well, that wasn’t the case for me. If you’re thinking about making your own epoxy river table, you can learn a thing or two from my mistakes.

How To Make A Live Edge Epoxy Table

How To Make A Live Edge Epoxy Table

* This post was sponsored by Environmental Technologies. I received epoxy in exchange for this post, but all opinions are mine*

Custom American Elm (or Similar) And Epoxy River Dining Table

The basic steps for building a living room table can be pretty simple, but this isn’t a cheap job, so you really don’t want to mess it up. Do your research. I didn’t do enough research beforehand. I usually like to jump right into work and learn from my mistakes. Looking back, here are some books I should have read sooner:

How To Make A Live Edge Epoxy Table

I started this riverside side table with live cherry wood that I purchased from The Wood Source in Ottawa. It was about 4 feet long and 18 inches wide Tony cut it in half for me on the saw, and I sanded and removed the bark from the core side.

Later I will build the modules. I used 3/4″ melamine strip for the sides of the frame and 1/4″ melamine strip for the bottom.

How To Make A Live Edge Epoxy Table

Waterfall Live Edge River Coffee Table With Plexiglass Leg And Glowing Resin

I think the 1/4″ melamine gives a smooth surface and the coffee table comes off as soon as the plastic hardens. Do not do it!

1/4″ mdf doesn’t open right away. No, it’s like a thousand pieces. And it was only a few hours after it was cut and used a belt knife to remove the rest. Save time and use thick melamine for shapes !

How To Make A Live Edge Epoxy Table

Once you’ve prepared your cherry wood and set it up, it’s time to pour in the turpentine. First I mixed a small amount of two part epoxy and sealed the bottom of the model. This way you won’t get bubbles on the bottom of the coffee table. I then carefully inserted two pieces of wood with sharp edges into the pattern and glued them to the pattern.

Best Wood Slabs For Epoxy & River Tables: 2

Next is the time to mix the resin for the river. I mixed a quart of turpentine and added a blue color and some green dye. It was planned to make the river blue to look like a warm sea. I figured that just the amount of dye I added would get the perfect color. It looks good when I mix it, but as the plastic hardens, it changes color. It looks more like a toxic dump in the river than a beach in Jamaica, and I don’t like it.

How To Make A Live Edge Epoxy Table

My goal is to make a batch of resin, get a perfect glass-like shine, and make it happen. It didn’t happen. Like I said, I spent several hours sanding the melamine from the bottom, and then spent a lot of time sanding the top down to a smooth line. Here’s how to treat the surface after sanding…

Now let’s go back to the color theme, because the story of this table is very beautiful.

How To Make A Live Edge Epoxy Table

Live Edge Slab Coffee Table

To fix the color, I mixed a small amount of epoxy and added more light blue dye and a small drop of matte black. I poured it on the bottom of the coffee table, right on top of the coffee table.

After it cured, I buffed the plastic to give it a sheen. From the top of the screen, the color changes to a beautiful blue.

How To Make A Live Edge Epoxy Table

The last step for this plastic coffee table is to pour the top coat. I mixed the turpentine, poured it onto the surface, using a straight card, and spread it over the surface over the edges.

We Now Make Epoxy River Tables

Then you can blow out all the bubbles with a flashlight or a straw. Once you’re happy with the surface and make sure no water drips along the edges or bottom, leave it alone! Let it dry for 24 hours without touching it.

How To Make A Live Edge Epoxy Table

My last mistake was that I (or Tony, not sure who was responsible) touched the robot before it was controlled by the left. I was thinking of sanding it all down and giving it a matte finish, but high gloss epoxy is fine. I then lightly sanded the surface with 400 grit paper to remove fingerprints and poured a layer of epoxy on top. The end result is beautiful with no fingerprints and smooth and shiny.

Wouldn’t you ruin your socks if you spent all your time working on the countertop only to get a screw through the top when you step on it? No, it’s not funny, Tony. This hasn’t happened to me. The leg insert is in fact the best part of this coffee table.

How To Make A Live Edge Epoxy Table

Hand Made Epoxy Table, Cherry Wood Live Edge By Prodigy Built

I bought some metal pins at Lowe’s and spray painted them black. To mount them, I pre-drilled a hole and used a 5/8 inch screw to secure the stud to the top.

Overall, I love the design of this riverside coffee table. I made some mistakes, but corrected them and ended up with a beautiful piece of furniture. Have you ever made a River coffee table? Is your build a little smoother than your experience?

How To Make A Live Edge Epoxy Table

I made this coffee table as an auction item for a charity event, and it’s looking amazing in its new home!

Live Edge Single River Epoxy Table

This website uses cookies to improve your experience. We’ll assume you’re ok with this, but you can opt-out if you wish. Accept Read more

How To Make A Live Edge Epoxy Table

This website uses cookies to improve your experience while browsing the website. Among these, the cookies classified as essential will be stored in the browser as they are necessary for the implementation of the website’s essential functions. We also use third-party cookies to help us analyze and understand how you use this site. These cookies will only be stored in your browser with your consent. You also have the option to refuse these cookies. But leaving some of these cookies could affect your browsing experience.

Necessary cookies are essential for the website to function properly. This category only contains cookies that guarantee the essential functions and security features of the website. These cookies do not store any personal information.

How To Make A Live Edge Epoxy Table

River Tables You Can Buy In 2022

Any cookies that may not be particularly important for the website to function and is only used to collect user personal information via analytics, ads, other related contents are known as non-essential cookies. . Your consent is required before running these cookies on your website. In this epoxy countertop tutorial, learn how to build a countertop with a direct epoxy paint surface for an outdoor kitchen. In addition, I have also shown you many useful tips on epoxy paint and woodworking techniques.

In this step-by-step guide, I reveal more tips on how to create a unique epoxy resin table.

How To Make A Live Edge Epoxy Table

First off, I’d like to include TotalBoat Penetrating Epoxy in my list of the best epoxies to use on epoxy riverboards.

Custom Live Edge Tables San Diego

There are some things that are difficult to explain in detail with words and pictures, so be sure to watch the video tutorial below.

How To Make A Live Edge Epoxy Table

My client asked for the living room side to face his outdoor kitchen, the living room side to the lake and the 2 sitting sides to the river.

I basically used a grinder with a kutsall sanding disc to smooth the edge of the natural wood.

How To Make A Live Edge Epoxy Table

Custom Live Edge Coffee Table Made With Walnut Blue Uv Resin

I used 1 sheet of 3/4″ plywood to make this epoxy coffee table.

Then I used the pocket holes to attach 2 pieces of 8 inch plywood to each end. This makes the plywood 16 feet long by 20 inches wide.

How To Make A Live Edge Epoxy Table

Although 3/4″ plywood is very strong, the epoxy must be supported at each end and in the center to prevent warping.

Blue Epoxy Resin Custom Table With Walnut Live Edge

I cut 1.5 feet off each end and used these pieces at each end of the epoxy.

How To Make A Live Edge Epoxy Table

I also chose not to seal the mold on the sides as I didn’t feel it was necessary.

After using the tape, I put each piece of wood into the plastic mold and positioned them correctly.

How To Make A Live Edge Epoxy Table

How To Build A Live Edge Epoxy Resin

Next, I covered the underside of the live side with silicone to keep the epoxy from leaking under the table.

Apply a thin layer of petroleum jelly or wax to the tape to help remove the plastic from the epoxy table.

How To Make A Live Edge Epoxy Table

After the epoxy was clear, I slowed down and added a small amount of blue powder.

Build A Live Edge Epoxy Resin Table

It’s a good idea to add a little powder at a time, especially if it’s your first time.

How To Make A Live Edge Epoxy Table

Live edge epoxy river table, live edge epoxy coffee table, live edge epoxy dining table, live edge slab epoxy table, live edge table with epoxy, live edge epoxy end table, epoxy for live edge table, live edge epoxy table, live edge wood epoxy table, round live edge epoxy table, live edge and epoxy table, epoxy resin live edge table

Leave a Comment