How To Make A Table Saw From An Old Drill

How To Make A Table Saw From An Old Drill – How to make a DIY mobile desk that doubles as a desk. This is a simple but very useful DIY garage workbench plan with wheels and arms. I hope you enjoy this build!

Indeed, since its , this garage workbench has become a must-have for any DIY project. This is the type of DIY project that will enhance your next woodworking experience.

How To Make A Table Saw From An Old Drill

How To Make A Table Saw From An Old Drill

First of all, this project is very simple. Just uses 2×4's and plywood. It's also very forgiving: the main purpose is to create a flat surface for the table saw and the tabletop you use as a DIY surface. Therefore, the structure of the desktop should not be too precise.

Diy Workbench For Table Saw

Here is a finished DIY workbench model. I designed this mobile desk and built it with my wife.

How To Make A Table Saw From An Old Drill

The main table is a large screen and is great for building things. It was wide enough to connect my front and back yards to the outer gate.

We placed our portable table on the lower table. So it can also be used as a desk chair. The table saw became one of the most used tools in my DIY arsenal when I used an Ikea hack to build a window seat.

How To Make A Table Saw From An Old Drill

How To Make Shaker Cabinet Doors On A Table Saw [plans]

For DIY projects; It's always good to watch a video to get a general idea of ​​all the steps. That's why I've created this video that walks you through the process of building a workbench and highlights the key points for making this project a success. You can watch the video by clicking the button below.

Here is a 3D model I built in SketchUp. The entire desk is about 68″ L x 34″ W x 36″ H and I usually keep it in my garage.

How To Make A Table Saw From An Old Drill

The size I decided on was the size of my garage (where this workbench will be stored) to make sure it would fit through our back door if I wanted to move it to the back yard for future DIY projects.

Diy Table Saw Stand With Plans

I use a Craig pocket jig to join the boards together. In this way, the screws are better hidden and it is easier to place the boards.

How To Make A Table Saw From An Old Drill

However, I will say that the 2×4 boards can be connected with L braces or simply countersunk, and the use of pocket holes is optional.

Btw here's a quick tip for tracking your cut list. I like to write everything down, including the length of each board and how many I need. As you cut the boards, you can scratch them and trace what's left.

How To Make A Table Saw From An Old Drill

Bosch 4100 10 Jobsite Table Saw [reviewed]

As for the bottom frame, it was cut to length with a miter saw and attached to the base frame.

The touchscreen is big enough so I don't mind plugging it into the pocket port. It is also the outermost layer. The screw head turned out fine.

How To Make A Table Saw From An Old Drill

By the way, I added some metal hardware with two 2×4 boards sandwiched between them and glued them to the 2×4s to hold the wedge together.

Get The Most From Your Portable Tablesaw

After all the vertical boards were added, two rectangular frames were attached to support the table top, which we then attached. This step is pretty straightforward.

How To Make A Table Saw From An Old Drill

Now that the structure is built, let's build the table tops. And I promise it will look a lot like desktop after this step.

For table top. I use ¾ inch plywood. Flat I get extra good quality because I want it to be smooth and durable (fewer future replacements).

How To Make A Table Saw From An Old Drill

Dewalt/black & Decker

Also consider a simple tree. The oak veneer plywood I chose was red oak hardwood. This is usually because it creates a stronger scratch-resistant surface than wood. I used the same plywood to create a built-in desk for a home office desk.

We bought 4″ x 8″ plywood from Home Depot and cut it at the store – just make a cross cut (make sure to leave enough space for the table top). So we made it about a third of the way and were able to fit into our little jeep.

How To Make A Table Saw From An Old Drill

After we got the plywood home, we cut it to size on the workbench because it was easy to measure. and cut to size with a circular saw.

How To Make A Miter Sled For Table Saw [step By Step]

About 1/2 inch left on each side. After cutting the plywood, the edges can be quite rough, so I lightly sand it with a layer of sandpaper.

How To Make A Table Saw From An Old Drill

I will try to make the tablet removable. That way, if it gets damaged in the future, it can be easily replaced. That's why I use L brackets to fix the table top. Drill a pilot hole and secure with ⅝ screws.

When attaching the plywood, make sure it is only ¾ inch deep. Where to stop can be drilled with blue tape.

How To Make A Table Saw From An Old Drill

Mobile Table Saw Cart For Dwe7491rs

Is the table top a little higher than the ideal table? In this way, the cut wood does not get stuck between the ridges and can fall naturally on the work table.

However, if your table is slightly taller than the table saw. There is an easy fix. Just place something at the end of the table to cheer it up. I like to just use metal sheets or wood sheets.

How To Make A Table Saw From An Old Drill

Now we add a large piece of plywood to this DIY workbench. This is to add a surface to the bottom of the desk for storage.

Making A Table Saw

To reduce costs; I bought cheap plywood for the bottom shelf because I plan to use it to store raw materials.

How To Make A Table Saw From An Old Drill

For attaching plywood to the lower shelf; We use a different method than tabletop. We change less often; So I just glued it to the frame with a very easy and quick nailer.

A grader is useful when you want to stand on a workbench and create a level surface for certain projects.

How To Make A Table Saw From An Old Drill

A Table For My Table Saw

For heavy covers, a template is included. So I basically follow the guide and play with the pattern to make sure the height works well. I also made sure that the roller had to work with the leveler in terms of height.

After installing the hardware, I tested it by turning it over on the workbench and testing the leveler. I must say that they did a very good job.

How To Make A Table Saw From An Old Drill

The castor wheels roll smoothly, making it very easy to roll this workbench out of our garage. And the Leveler is very cool and very easy to raise and lower.

Powermatic Pm1000 Table Saw

Basically, this project is done. But I did take the step of finishing the table top to make it more durable.

How To Make A Table Saw From An Old Drill

I use a water based polish. I really like that it dries quickly and has no smell. A total of three layers were applied.

Finally, the table horse can be placed on the table and used. This was a huge DIY improvement since I cut the wood on the floor for the table (which I will never go back to lol).

How To Make A Table Saw From An Old Drill

How To Make A Table Saw

We hope you like the DIY Workbench Plan with Table Saw. This is definitely a simpler project that I made. But it made a world of difference to me. I used it to create a floating double vanity for my bathroom, which challenged my skills, but luckily I had a large worktop. Stay tuned for the post!

For more DIY projects, you can always visit my Pinterest DIY tutorials from me and other makers. I continue to work in my shop and find useful homes for all my tools. Today I am sharing a simple table cart for a compact table.

How To Make A Table Saw From An Old Drill

DIY tutorial for making a table saw cart. Build a mobile home for a compact 10-inch workbench with two storage shelves and an extra work surface.

Rockwell 34 660 10” Table Saw Bigiron Auctions

If you've ever used a table saw on the floor, you know exactly how great it is to finally have a proper cart. Life changes and it's easier to kneel. Depending on the work situation, you may be able to accommodate a larger station, but this cart is perfect for my small tent shop.

How To Make A Table Saw From An Old Drill

I built this table saw cart specifically for the Dewalt 10″ compact table saw, but it can easily be modified to fit your table saw.

I designed this cart to fit my Dewalt table. If using a different brand, double check the size. More precisely, you need to measure the space between the rails to make sure it fits the table. When the rails move back and forth to adjust the fence, you need to have enough clearance to avoid hitting the table. my table

How To Make A Table Saw From An Old Drill

My First Workbench, Fitted For Ridgid Table Saw.

Leave a Comment